4-56
41-001343-01 Rev 02, Release 3.2.2
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Virtual Local
Area Network (VLAN) Settings”
on
page A-41.
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select
Administrator Menu.
3
Enter your Administrator password.
Note:
The IP Phones accept numeric passwords only.
4
Select
Network Settings.
5
Select
VLAN Settings.
To globally enable/disable VLAN and set priority for non-IP packets
:
6
Select
VLAN Enable
.
7
Press
Change
to set VLAN Enable to “
Yes”
to enable or “
No”
to disable. Default is “
No
”.
8
Press
Done
to save the changes.
9
Select
Phone
VLAN
.
10
Select
VLAN
Priority.
11
Select
Other
and enter a non-IP priority value from
0
to
7
for non-IP packets.
Default for this field is
5
.
12
Press
Done
(3 times) to return to the VLAN Settings menu.
To set VLAN ID and priority for LAN Port (Port 0):
13
Select
Phone VLAN.
14
Select
Phone
VLAN ID
and enter a value from
1
to
4094
to specify the VLAN ID for the LAN Port.
Default is
1
.
15
Press
Done
to save the change.
16
Select
VLAN
Priority
.
17
Select one of the following VLAN Protocols:
•
SIP Priority
•
RTP Priority
•
RTCP Priority
18
Enter a VLAN priority value from
0
to
7
for the associated Protocol. Default values for each Protocol
are:
SIP Priority = 3
RTP Priority = 5
RTCP Priority = 5
