manualshive.com logo in svg

Aastra 6700i Series, Administrator'S Manual

The Aastra 6700i Series is an innovative and user-friendly communication device. Enhance your user experience with our detailed Instruction Manual, available for free download. Easily access this manual from manualshive.com, empowering you to make the most of this exceptional product.

Share
Download
background image

41-001343-01 Rev 02, Release 3.2.2

 

UPnP - Intel

INTEL SOFTWARE LICENSE AGREEMENT (Final, Site License)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 

Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms 
and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or 
use the Software.

LICENSE. You may copy the Software onto your organization's computers for your organization's  use, and you may make a reasonable 
number of back-up copies of the Software, subject to these conditions: 
1. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to 
prevent unauthorized copying of the Software.
2. You may not reverse engineer, decompile, or disassemble the Software. 
3. You may not sublicense the Software. 
4. The Software may include portions offered on terms in addition to those set out here, 
as set out in a license accompanying those portions. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains
 with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international 
treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items 
referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, 
Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the 
Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software.

LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from 
material physical defects for a period of ninety days after delivery by Intel. If such a defect is found, return the media to Intel for replacement 
or alternate delivery of the Software as Intel may select.
EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT 
ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, 
NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. 
Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items 
contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES 
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) 
ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR 
LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE 
ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM 
JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. 
Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or 
return all copies of the Software to Intel.

APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict 
of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable 
export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized 
representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." 
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or 
its successor. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or 
Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052.

Summary of Contents for 6700i Series




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6700i Series

palmOne Treo 600 Quick Manual preview
Treo 600
Brand: palmOne Pages: 2
Samsung SM-M135FU/DS User Manual preview
SM-M135FU/DS
Brand: Samsung Pages: 108
cromax C2A Assembly Procedure preview
C2A
Brand: cromax Pages: 9
Alcatel ONE TOUCH 6033A Quick Start Manual preview
ONE TOUCH 6033A
Brand: Alcatel Pages: 21
Doro Primo 305 Quick Start Manual preview
Primo 305
Brand: Doro Pages: 2
SoftBank 920T Manual preview
920T
Brand: SoftBank Pages: 2
Wistec BT-323-EE User Manual preview
BT-323-EE
Brand: Wistec Pages: 60
Audiovox CDM-8910WW User Manual preview
CDM-8910WW
Brand: Audiovox Pages: 70
Hyundai W25544L User Manual preview
W25544L
Brand: Hyundai Pages: 25
Sagem MY400X User Manual preview
MY400X
Brand: Sagem Pages: 96
Jabbla Vibe 12+ Operating Instructions Manual preview
Vibe 12+
Brand: Jabbla Pages: 30
ShoreTel IP480 Quick Reference Manual preview
IP480
Brand: ShoreTel Pages: 3
Audiovox CDM 4500 Operation Manual preview
CDM 4500
Brand: Audiovox Pages: 49
Samsung SGHT589R User Manual preview
SGHT589R
Brand: Samsung Pages: 32
Samsung SGH-M140L User Manual preview
SGH-M140L
Brand: Samsung Pages: 26
Samsung SM-A035M User Manual preview
SM-A035M
Brand: Samsung Pages: 96
Samsung SM-A226BR/DSN User Manual preview
SM-A226BR/DSN
Brand: Samsung Pages: 116
Samsung SM-A055F User Manual preview
SM-A055F
Brand: Samsung Pages: 119

Brands by name

Popular brands

Load more brands