5-60
41-001343-01 Rev 02, Release 3.2.2
Locking the IP Phone Keys using the Configuration Files
Use the following procedures to lock the softkeys and programmable keys on the IP phone.
Locking/Unlocking the SAVE and DELETE keys (6753i)
There are 4 programmable keys on the 6753i phone located to the left of the paper label. Two
additional keys (SAVE and DELETE) can be made programmable by the Administrator,
providing a total of 6 programmable keys if required.
If a System Administrator unlocks the
SAVE
and
DELETE
keys, these keys can be configured
with the same functions that are available for the other programmable keys. Only the System
Administrator can unlock these keys.
The
Save
key allows you to save entries to the Directory and perform a Save-To from the Callers
List. It also allows you to save speeddial information to a programmable key. You can also use
the
Save
key while using specific XML applications.
The
Delete
key allows you to remove entries from the Directory List and Callers List. (Must
enter the Directory or Callers list and select an entry, then press twice to delete entry).
By default, the
Save
and
Delete
keys are locked so that a user can use them for saving and
deleting only. An Administrator can unlock these keys using the configuration files, allowing the
keys to be programmed with other functions if required. An Administrator can use the following
parameters in the configuration file to lock and unlock the
Save
and
Delete
keys:
•
prgkey1 locked
•
prgkey2 locked
The value of "
0
" unlocks the keys, and the value of "
1
" locks the keys. The default is "1" (lock).
The following is an example of unlocking the
Save
and
Delete
keys using the configuration
files:
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Locking Softkeys and Programmable Keys”
on
page A-229.
Save Key
Delete Key
6753i Programmable
Keys
Directory
Callers List
Transfer
Conference
