manualshive.com logo in svg

Aastra 6700i Series, Administrator'S Manual, Page: 613 / 1043

Share
Download
Aastra 6700i Series Administrator'S Manual Download Page 613

5-336

41-001343-01 Rev 02, Release 3.2.2 

Custom Ad-Hoc Conference

Previously, the phone will wait for server response prior to completing the ad-hoc and 
centralized conference feature. This results in an interoperability issue with certain call 
managers, such as Genband. Now the phone no longer waits for server response before referring 
the call to the conference host when the "

custom adhoc conference

" parameter is enabled.

Configuring the “Custom AD-Hoc Conference” Feature Using the Configuration 
Files 

You use the following parameters to configure the “Custom AD- Hoc Conference” feature in the 
configuration files:

custom adhoc conference

“SIP Join” Feature for 3-Way Conference 

The IP Phones support RFC 3911 which allows an additional caller to join an active call between 
two parties if the caller knows the dialog information. This feature begins a conference using a 
join header as described in RFC 3911.

The “SIP Join“ feature provides the following:

2

In the “

Conference Server URI

” field, do one of the following actions:

•

To disable centralized conferencing on this line, leave this field empty (blank). 

•

To enable SIP centralized conferencing on this line, do one of the following actions: 

— If you have specified a proxy server/registrar server, then to reach the media server via the 

proxy server, set this field to one of the following:

conf 

(Sylantro server), or 

Conference

 (Broadsoft server)

By setting this field to 

conf 

or

 Conference

, you specify conf@<proxy_server _address>: 

<proxy_port>.

— To reach the media server using a different address/port than that specified by the proxy, 

set this field to the following:

conf@<media_server _address>: <media_port>

3

Click 

 to save your changes.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, 

“Custom Ad-Hoc 

Conference”

 on 

page A-97.

Aastra Web UI

Summary of Contents for 6700i Series




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments