41-001343-01 Rev 02, Release 3.2.2
A-69
SIP Local Dial Plan Settings
Parameter
–
sip dial plan
Local Dial Plan
(in Web UI)
Aastra Web UI
Basic Settings->Preferences
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
A dial plan describes the number and pattern of digits that a user dials to
reach a particular telephone number. The SIP local dial plan is as follows:
Symbol
Description
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
Digit symbol
X
Match any digit symbol (wildcard)
*, #, .
Other keypad symbol; # can terminate
a dial string
|
Expression inclusive OR
+
0 or more of the preceding digit symbol
or [] expression
[]
Symbol inclusive OR
-
Used only with [], represent a range of
acceptable symbols; For example, [2-8]
“,” (open/close quotes)
In the configuration files, enter the sip dial
plan value using quotes.
.;.
Used when a secondary dial tone is
required on the phone. (For example,
“9;xxxxxx”, when a user has to dial “9” to get
and outside line and needs a secondary dial
tone presented.
You can configure prefix dialing by adding a prepend digit to the dial
string. For example, if you add a prepend map of “[2-9]XXXXXXXXX,91”,
the IP phone adds the digits “91” to any 10-digit number beginning with
any digit from 2 to 9 that is dialed out. Other examples of prepend
mappings are:
1X+#,9
(Prepends 9 to any digit string beginning with “1” and terminating
with “#”.)
6XXX,579
(Prepends “579” to any 4-digit string starting with “6”.)
[4-6]XXXXXX,78
(Prepends “78” to any 7-digit string starting with “4”, “5”,
or “6”.
Format
Alphanumeric characters
Default Value
X+#|XX+*
Range
Up to 512 alphanumeric characters.
If a User enters a dial plan longer than 512 characters, or a parsing error
occurs, the phone uses the default dial plan of “x+#|xx+*”. If this is the
case, the Administrator cannot change the dial plan from the
configuration files. The dial plan must be changed from the Aastra Web
UI.
Example
sip dial plan: "X+#|XXX+*"
