A-30
41-001343-01 Rev 02, Release 3.2.2
Multiple Configuration Server Settings
Additional Information
The directory files, language packs, TLS certificate files, 802.1x certificate files, and HTTPS
files can also be downloaded to the phone from a server other than the configuration server. For
each of these types of files, you can specify a URL (server IP address) from which the phone
gets these files. You can use existing parameters on the phone to specify the URL. For more
information about this feature, refer to
Chapter 1
, the section,
“Directory Files, Language Packs,
TLS Certificates, 802.1x Certificates, HTTPS Files and Multiple Configuration Servers”
on
page
1-46
.
For information on configuring the directory, language pack, TLS certificates, 802.1x
certificates, and HTTPS parameters, see the applicable parameters in this Appendix.
Parameter
–
firmware server
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Specifies the URL of a server (other than the original configuration
server) from which the phones in the network get their firmware.
Note:
The default method for the update of firmware to the phones is
from the original configuration server. The Administrator must specify a
correct server URL for the phones to get their firmware information from
that server. If the URL is incorrect, no firmware download occurs to the
phones from the specified server.
Format
String (up to 256 characters)
FTP
“ftp://username:[email protected]:port/path”
TFTP
“tftp://0.0.0.0:port/path”
HTTP
“http://0.0.0.0:port/path”
HTTPS
“https://0.0.0.0:port/path”
Default Value
Blank
Range
Not Applicable
Example
firmware server:
Leaving this parameter blank downloads all configuration and firmware
files from the original configuration server.
firmware server: tftp://10.30.102.158/test1
The above example uses TFTP to download all firmware files that exist
in the “test1” directory on the specified server, to the phones.
