Pannoramic 250 FLASH III 3.0.2 User’s Guide
1.2.2 Hardware Options
Preview
Figure 6 – Preview camera (1), Brightfield preview lamp (2), and Dark-field preview lamp (3)
At fluorescent sections the dark-field preview makes the fluorescent samples detectable even for the
user and for the automatic marking algorithm. By detecting the sample the fluorescent scanning will
be much faster since the software will not waste time on empty FOVs.
Unit options
•
Pannoramic® 250 FLASH III Basic Brightfield Option – base unit equipped with Adimec
QUARTZ Q-12A180
camera for Brightfield scanning (no fluorescent accessories included)
•
Pannoramic® 250 FLASH III Basic Fluorescence Option – base unit completely equipped with
Point Grey Grasshopper 3
camera and Lumencor SPECTRA 6 fluorescence illumination unit,
trigger cable and filters for fluorescence scanning
•
Pannoramic® 250 FLASH III Advanced Fluorescence Option – base unit completely equipped
with Adimec QUARTZ Q-12A180
camera for Brightfield scanning, and with pco.edge 4.2
camera and Lumencor SPECTRA 6 fluorescence illumination unit, trigger cable and filters for
fluorescence scanning
NOTE:
If Lumencor SPECTRA 6 unit is ordered, the custom light source and filter modules can
be variable. For more information, please contact 3DHISTECH customer service.
Objectives
•
Plan-Apochromat 10×/NA 0.45 (optional, can be used only for FL scanning)
•
Plan-Apochromat 20× / NA 0.8
•
Plan-Apochromat 40× Corr/ NA 0.95
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
22(156)