Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.2.5 Bottom menu bar of the main window
5.2.5 Bottom menu bar of the main window
Profile History
This function can be activated by clicking
in
Preferences
. During setting scanning profile all of
the previously used parameter will be saved automatically. Each modification in the profile creates a
so-called Milestone unit. These stage units are linked in a row displayed at the bottom left corner of
the main window.
Figure 73 – Progress of the profile modification history
Once you are moving the mouse cursor over a unit all of the parameters will become visible in a pop-
up window.
Figure 74 – Details of parameter modification
For the easier perspicuity, modifications can be observed in a pop-up window by clicking the
button in which both the original and the modified values are presented.
Click
to save parameters of the milestone unit into a new profile. Click
to restore a
modification stage (load parameters of a milestone unit) if needed.
Figure 75 – Profile history tree
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
103(156)
