Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.2.2 Microscope Control Panel
Dilate mask
Adjust the slider to enlarge or decrease the scanned area. To switch to manual mode click the top left
corner of the button and the required value can be entered in the box
.
Preview Toolbar
This section is located at the bottom of the preview image.
•
Save scanmap
Click this icon to save the currently selected areas to scanmap.
•
Position
To position the specimen holder that holds the current slide, click
Position sample
and then
click on the area of interest on the preview image. This will define the Live image that you can
access from the
Live view
.
•
Union
Add the selected areas to the preview. Mark area for scanning based on the shape selected in
the Preview Toolbar. This area will not be scanned.
•
Erase
Delete selected areas from the preview image. Deselection is made based on the selected
shape from the Preview Toolbar. This area will not be scanned.
Figure 54 – Not scanned selection
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
91(156)