![background image](http://html1.mh-extra.com/html/3dhistech/pannoramic-250-flash-iii/pannoramic-250-flash-iii_user-manual_442167120.webp)
Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.6.1 Settings
▪
Slide name
▪
Slide index
▪
Rack index
General naming settings
Naming pattern – The set string defines the slide naming pattern (shown by the example
below the text box). Click
Reset
to set pattern to default. The abbreviations and their
meaning are listed at the bottom of the section under
Usable abbreviations
.
•
–
Basic settings
Figure 88 – Basic settings
On this panel, you can define the swap file location, set shutter auto close time in FL, and
set the number of compensation images for preview camera if needed.
For more comfortable and safer use, by defining a location in the
Planner autosave
folder
field, a scan plan will be automatically saved. The save frequency can be set in the
Number of reserved autosave
box. Set the character as value separator used in the
Planner export file at the
CSV separator
field.
Click
Apply
to accept modifications.
•
– Profile behavior settings
Figure 89 – Profile behavior settings
◦
Use profile history save
– With this function each profile modification is saved in Profile
History from which the different stages can be reloaded.
◦
Save interval
– Profile content is automatically saved at the specified time-frames.
◦
Enable setting of focus time
– Parameters (
Short
/
Normal
/
Long
) related to focus time
will be enabled on the profile settings panel.
Normal
is set as default.
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
120(156)