Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.1.2 Microscope Control Panel
◦
Crop
– Crop the area of the selected area.
•
Place Circle
– You can select the area to be scanned with the different tools on the
Preview toolbar.
•
Place focus point
You can add manual focus points on the preview image – the coordinates of the manual focus
points you add are listed on the
Focus settings
panel.
NOTE:
The maximum number of focus points that you can manually add is 100.
•
Rectangle tool
– Draw rectangle shaped area.
•
Ellipse tool
– Draw ellipse selection.
•
Polygon tool
– Area selection by defining a polygon shape. Finish area selection by
double-clicking with the mouse at or near the starting point.
•
TMA tool
– TMA tool is used for selecting TMA spots on TMA slides. You can set the
selection settings on the following four tabs:
•
TMA Grid Setting
– This function is enabled only if a TMA grid has already been placed
on the preview image. Set grid parameters (row and column numbers) and spot shape (round
or rectangle).
Figure 36 – TMA tool: Grid selector
Delete TMA grid by clicking the
X
at the top right corner, and rotate grid by clicking the icon
at the bottom right corner. Enter the number of rows and columns in the
Rows
and
Columns
fields or select the appropriate values with the arrows.
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
69(156)
