Pannoramic 250 FLASH III 3.0.2 User’s Guide
About this User's Guide
Disconnect plug!
Remember to unplug the power cord before you open the Pannoramic® 250
FLASH III or replace a fuse!
Warning!
Use only electric fuses which are rated for the specified nominal current. You
are prohibited from using makeshift fuses or short-circuiting of a fuse holder.
Warning!
The Pannoramic® 250 FLASH III does not include any special facilities to protect
from samples with an etching, potentially infectious, toxic, radioactive or other
health-damaging effect. You are under obligation to comply with all currently
binding legislation, notably, national accident prevention rules when handling
samples of this kind.
Caution!
Dirt or dust may adversely impact the operating capability of the Pannoramic®
250 FLASH III. For this reason, measures must be taken to eliminate such
influences to a maximum possible degree. During periods of non-use, the
Pannoramic® 250 FLASH III must be protected with a dust cover. Check that
power is turned off before you put the cover on.
Crush hazard!
There is crush hazard in the movement area of the slide insert during operation.
Please note that the digitizing process has to be interrupted and the insert
moved via software to the output position before removing the insert.
Warning!
Clogged or covered ventilation slots may result in a heat build-up with a
damaging effect for the Pannoramic® 250 FLASH III. In extreme cases, this may
also cause fire. Keep the ventilation slots always unobstructed and refrain from
inserting or dropping objects into a ventilation slot.
Warning!
A defective Pannoramic® 250 FLASH III is not classified as domestic waste. It
must be properly disposed in accordance with currently valid legal
requirements.
Warning!
The Pannoramic® 250 FLASH III may not be operated by other than properly
instructed persons. Operating personnel must be fully aware of the potential
dangers which a particular field of application involves. The Pannoramic® 250
FLASH III is a precision instrument which may suffer a significant reduction in
operational functions or even physical destruction following intervention
performed in any nonconforming manner.
Warning!
Use of this instrument in a dry environment, especially if synthetic materials are
present (synthetic clothing, carpets, etc.) may cause damaging electrostatic
discharges that may cause erroneous results.
Caution!
Do not position the equipment so that it is difficult to operate and to disconnect
the device if necessary.
Caution!
The safety level of the equipment after servicing giving back to use is the same
with the original equipment.
Caution!
There is no further operator (user) action required in case of residual risks.
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
11(156)
