Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.5 Progress features
5.5 Progress features
The progress is visible both in Microscope and Planner modes whenever there is a running hardware
operation or scanning procedure. Progress content can be therefore different depending on the type
of the running procedure.
Figure 86 – Progress information
The following information is included in the progress log list during scanning:
•
Filter
•
Elapsed time
•
Location
•
Slide name
•
Free space
•
FOV number
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
115(156)