Pannoramic 250 FLASH III 3.0.2 User’s Guide
5 Scanning modes and settings
5 Scanning modes and settings
After microscope initialization, if fluorescence hardware option is provided, you can select from the
following two modes:
•
Brightfield scanning mode
(see chapter
5.1 Brightfield Scanning Mode
for more information)
•
Fluorescence scanning mode
(see chapter
5.2 Fluorescence Scanning Mode
for more
information)
•
Option modes
◦
Scanner mode
◦
Services
(see chapter
5.6 Services and Settings
for more information)
◦
Settings
(see chapter
5.6 Services and Settings
for more information)
In accordance with the selected mode, the
Profile Settings Panel
and the
Microscope Control Panel
views are modified.
5.1 Brightfield Scanning Mode
Microscope View consist of three different sections:
•
Main functions
: Located at below the window header, these functions are identical in both
modes.
•
Profile Settings panel
: Profile settings containing parameters used for scanning.
•
Microscope Control Panel
: Live microscope movement functions
Figure 25 – Main window of Brightfield Microscope mode
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
56(156)