Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.6.2 Service
Note:
The maximum number of virtual filters is 50 if you insert penta filters
(and this type is selected from the
Filter type
list) in the available 10
filter positions in the turret.
◦
Move filter wheel to insert position
◦
Enable position
Note:
Whenever a selected physical filter is disabled, the filter itself must be
removed from the turret.
◦
Select
Filter type
,
Filter channel
, and
Filter name
◦
Check
Available for scanning
◦
Set
Lumencor LED light source
, set
Excitation
and
Emission wavelength
/
bandwidth
values for the selected filter.
◦
Set
Pseudo-color
◦
Select channels used for grayscale conversion
◦
Select
Enable Lumencor hardware trigger
Click
Save
to save settings.
•
–
Z-difference
This function is available only for fluorescence settings; it enables you to set the basic focus
differences between the filters. This facilitates more precise focusing during scanning.
Figure 97 – Z-difference
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
128(156)