Pannoramic 250 FLASH III 3.0.2 User’s Guide
7 Troubleshooting and Maintenance
7. Switch on the power supply of the Pannoramic® 250 FLASH III (see chapter
).
8. Switch on the control computer.
9. Launch control software.
Illumination error! Probably there is a problem with the Xenon FLASH lamp. Please, turn off the
scanner.
•
Contact 3DHISTECH Service for support.
Image is black
•
Contact 3DHISTECH Service for support.
Virtual slide is improperly focused almost across its entire surface
•
Focus range enabled
•
Disable
Limiting focus range
.
Poor image quality
•
Imaging error (for example, chromatic aberrations)
•
Contact 3DHISTECH Service for support.
Warning!
Do not modify the camera driver settings, as the default settings
adjusted by 3DHISTECH, give the most accurate images.
Virtual slides show poor stitching in Pannoramic® Viewer
•
Scan camera is not properly adjusted (for example, due to loose fixture)
•
Contact 3DHISTECH Service for support.
Preview image is too dark / too bright
•
Invalid compensation image for preview camera
•
Capture a new compensation image for the preview camera (see chapter
)
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
140
(
156
)