Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.2.2 Microscope Control Panel
TMA tool is used for selecting TMA spots on TMA slides. You can set the selection settings on
the following four tabs:
•
TMA Grid Setting
This function is enabled only if a TMA grid has already been placed on the preview image. Set
grid parameters (row and column numbers) and spot shape (round or rectangle).
Figure 56 – TMA tool: Grid selector
Delete TMA grid by clicking the
X
at the top right corner, and rotate grid by clicking the icon
at the bottom right corner. Enter the number of rows and columns in the
Rows
and
Columns
fields or select the appropriate values with the arrows.
Enter the distance between two spots on the X and the Y axis in µm in the
Core distance
fields or select the appropriate values with the arrows. Enter the average diameter of the
spots in the
Core size
field or select the appropriate value with the arrows.
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
93(156)
