Optilia Instruments AB
www.optilia.eu
Rev D, January-2011
Installation instructions for W10x-HD camera
1. Assemble the Boom Stand according to the bellow picture.
2. Put the stand on a flat and stable working bench and mount the W10x-HD camera
onto the horizontal Boom.
3. Adjust height of the Boom for 245mm Working distance measured from front edge of
the camera. W10x-HD camera with standard optics has a focusing interval of
approximately 190-250mm. Auto focus will not function properly outside this range.
4. Working distance of the camera needs to be decreased according to the bellow if
close-up lenses are attached:
