Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 19 / 94

4-REAR WHELL COMPONENT 18
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
5
2 1224200-003000 ZT310-R Rear disc brake pipe clamp 2
3 1224100-044000 Wheel speed sensor clamp 2
4 1100100-825000 ZT350
－
GK brake hose RC
－
HU segment(A) 1
5 1181200-118000 Wheel speed sensor(A) 1
7 1244100-052000 Buffer rubber of flanging bushing (φ8.5×φ14×1) 3
8 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
2
9 1224300-048000 ZT350
－
R rear inner mud board
1
PROCEDURE:
●
Rear inner mudguard
Remove the muffler rear section by refering to the steps in "MUFFLER COMPONENT".Pull out the brake oil
tube
⑷
and wheel speed sensor cable
⑸
,which are on the right side of rear inner mudguard,from the rear disc
brake pipe clamp
⑵
.Remove the two sensor clamps
⑶
.
On the right side using 4# inner hexagon socket remove 2pcs bolts
⑴
,take off the brake pipe clamp
⑵
.
On the left side , using 4# inner hexagon socket remove 2pcs bolts
⑴
at the left front of the rear inner mud
board.,take off the flanging bushing
⑻
,bushing
⑺
;then remove the bolts at the left rear of the rear inner mud
board,take off the flanging bushing
⑹
,bushing
⑺
;remove rear inner mud board
⑼
.
CAUTION:
●
Use suitable tools supported the motorcycle, in case of accidents caused by motorcycle falling down. Single
person operating is prohibited.
●
Stay alert during the manipulation and avoid accident.
Fig.1 REAR WHELL
COMPONENT
Rear mud board
6 1251700-059093 Flanging bushing φ6.4×φ9×8
＋
φ18×2(environmental
color)
1