Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 63 / 94

7-FRONT FORK COMPONENT
62
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1250205-031091 ZT250-S Rearview mirror mounting hole rubber plug 1
2 1184300-019000 GB70.1M6×30
（
stainless steel
）
2
3 1244100-095000 Second Generation Left Handlebar Switch(TFT-500) 1
4 1184200-184000 ZT310-V1 left handlebar switch 1
5 1244100-041000 ZT250-R left hand rubber sleeve 1
6 1244300-036000 ZT350-GK shock absorber rubberfor steering handle 1
7 1134300-009000 ZT350-GK steering handle vibration absorber 2
8 1251300-095000 Inner M6 to outer M16 thread sleeve 1
9 1251512-046000 8.2×14×0.5 thrust washer (color zinc) 2
10 1190100-483000 KD150
－
G1 left rearview mirror (enlarged version) 1
11 1244300-041000 ZT350-GK steering handle rubber block 1
12 1134300-007000 ZT350-GK hand Guard 1
13 1134300-010000 ZT350-GK hand guard bar counterweight 1
14 1250205-128000 GB70.1M6×60
（
stainless steel
）
1
15 1244200-046000 ZT310-V clutch line sheath 1
16 1251300-073000 GB/T6185 hexagonal nylon lock nut M6 (color zinc) 1
17 1251100-198000 Non-standard inner hexagon socket bolt M6×13-φ8×20 1
19 1134200-027051 ZT310-V left handle bar rocker arm(dark gray matte) 1
20 1250201-039000
GB818
cross recessed pan head screw
M4×12
1
21 1184200-170000 ZT310-V clutch switch 1
Fig.16 FRONT FORK
COMPONENT
Left hand component
PROCEDURE:
●
Left mirror,Left switch,Hand guard,Left handlebar rubber sleeve
Remove the bolt
⒁
with 5# inner hexagon socket and remove the counterweight
⒀
; Remove the bolt
①
, remove
the hand guard rod
⑿
, rubber block
⑾
and rear-view mirror
⑽
. Remove the thrust washer
⑼
and remove the
threaded sleeve
⑻
with 6# inner hexagon socket. Screw the bolt
⒁
into the vibration absorbing rod
⑺
with 5#
inner hexagon socket, grasp the head of the bolt
⒁
, pull it out, and remove the vibration absorbing rod
⑺
and
buffer rubber
⑹
.
Remove the bolt
⑵
with 5# inner hexagon socket tool and remove the left auxiliary hand switch
⑶
and the left
handle rocker arm assembly
⒅
. Press the buckle pointed to
④
and pull out the plug of the auxiliary switch
⑶
of the
left handle. Press the snap pointed by arrow
⑤
and pull out the plug of left handle switch
⑷
. When assembling the
auxiliary switch, first screw the bolt about 10 turns, align the triangle symbol of the handle switch, tighten the upper
bolt, and then tighten the bottom bolt.
●
Soak in hot water for about 10 minutes, then blow the dust gun into the space between the left-hand handle
rubber sleeve and the steering handle tube according to the arrow
②
, and move outward at the same time to remove
the left-hand handle rubber sleeve
⑸
. Pull out the rubber plug
⑴
.
●
Replace the left-hand handle rocker arm and clutch switch
Remove the sheath
⒂
, fix the adjusting screw rod
⒄
with 5# inner hexagon socket, and remove the locknut
⒂
with 10#
sleeve.
After removing the adjusting screw
⒄
, separate the left-hand rocker arm
⒆
from the rocker arm seat assembly
⒅
.
Rotate the adjusting nut
③
to adjust the distance between the rocker arm and the left-hand handle rubber sleeve to adapt to
the hand feeling of different drivers.
First pull out the clutch switch wire plug, and then remove the bolt
⒇
with a cross screwdriver to remove the clutch
switch.
CAUTION:
●
The vehicle should be fixed before operation.
●
The disassembly and assembly of the clutch line is carried out according to the step of adjusting the clutch cable.
●
Note the triangle symbol on the rocker arm assembly and the half cover seam alignment switch.
ZT310-V left hand handle rocker arm seat
assembly(dark gray matte)
1134200-029051 18 1