Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 77 / 94

9-SIDE COVER COMPONENT
76
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 3
2 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
3
3 1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
3
4 4044302-009022 ZT350-GK Left cover uppe (matte black) 1
5 1244100-002000 ZT250
－
S Side cover round rubber
6
6 1184300-003000 ZT350-GK upper part of right side cover (matte black) 1
7 1251200-050094
Non-standard cross tapping screws ST3.9×12 (black zinc)
1
8 1240300-021000 HJ125
－
6 pod glass strip
（
1.5m
）
1
Side cover 18cm
9 1224100-010000 ZT250
－
S swell nail
6
10 1224300-063000 ZT350-GKRear brake sensor clamp 1
11 4044302-010022 ZT350-GK upper right cover (matte black) 1
PROCEDURE:
●
upper assembly of left and right covers
Remove one bolt
⑴
on the upper part
⑷
of the left cover with 4# hexagon socket, remove the turn over bushing
⑵
and buffer rubber
⑶
, pull out two Mushroom buckles on the side cover, remove the upper part
⑷
of the left
cover, turn it over to the other side, remove the self tapping screw
⑺
with a cross screwdriver and remove the
charging port seat
⑹
.
Remove one bolt
⑴
in front of the upper part
⑾
of the right cover with 4# inner hexagon, remove the turnover
bushing
⑵
and buffer rubber
⑶
, remove the upper part
⑾
of the right cover, and then remove the bolt
⑴
with 4#
inner hexagon, remove the turnover bushing
⑵
and buffer rubber
⑶
, and remove the sensor clamp
⑽
.
The upper components of the left and right covers are equipped with three side cover round rubber
⑸
.
CAUTION:
●
Before removing the upper part of the side cover, remove the cushion and rear armrest in advance.
●
Pay attention to the strength when removing the buckle to prevent damage to the buckle.
●
Protect materials and parts during disassembly to prevent scratches.
Fig.3 SIDE COVER
COMPONENT
Side cover component 3