Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 24 / 94

4-REAR WHELL COMPONENT 23
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1252200-040000 ZT310-R1 rear flat fork hollow shaft Φ20×315 1
2 1251300-067000 ZT250
－
R rear wheel hollow shaft nut
1 110±5N.m
3 1080200-106000 ZT350
－
GK 112 pitch chain (520 oil seal chain) 1
4 1251300-050000 ZT310
－
R chain adjuster bolt M10(304 stainless steel) 2
5 1251100-105000
ZT310-R chain adjuster bolt M10×70 (304 stainless steel)
2
7 1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
4
8 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
2
9 1244300-016000 ZT350
－
R rear fork anti
－
wear block
1
10 1271200-062000 KD150-U rear fork wear block fixing bracket 1
11 1274100-102000 Single rocker rear fork bushing 2
12 1244200-079000 ZT310 single rocker arm Φ25×Φ32×4 oil seal 4
13 1250602-035000 HK2516 needle roller bearing 4
Fig.6 REAR WHELL
COMPONENT
Rear fork component
After-sales
PROCEDURE:
●
Rear fork component
Person 1 fastensthe head of the rear fork shaft
⑴
,person 2 remove the nut
⑵
with a 30# sleeve.
Person 1 holds the rear fork assembly and the other person removes the rear fork shaft
⑴
with suitable tool and
then remove the rear fork assembly.
●
Rear fork rear-resistant block
Remove the bolts
⑺
,flanging bushing
⑻
with a 4# inner hexagon socket, then turn off the rear fork
assembly,using 4# inner hexagon socket remove 2pcs bolts
⑺
,take off the bracket
⑽
,and then remove the wear-
resistent block
⑼
.
Remove the chain adjuster bolt
⑸
and nut
⑷
with the 17# open end wrench.Put the rear fork bushing
⑾
inward
and remove it.Oil seal
⑿
and needle bearing
⒀
are used for interference compression.Please ensure that you have
the ability to disassemble and disassemble by yourself.
CAUTION:
●
Be sure to fix up the motorcycle in the process of disassembly.
●
The rear shock absorption, rear mud board ,rear wheel component,side cover component,pedal component
must be removed in advance.
●
Do not use a hammer to hit the rear fork shaft thread.
●
The rear disc brake caliper must not be higher than the disc brake oil cup, otherwise the brake will become soft
or faildue to air entering the pipeline. Because the brake line requires extremely high vacuum, it is necessary to
ensure sufficientcapacity for repair and disassembly.
6 4074300-002051 ZT350 aluminum alloy rear flat fork (dark gray matte)
assembly (including bearing / oil seal)
1