Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 58 / 94

7-FRONT FORK COMPONENT
57
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1250205-040095 GB70.1 inner hex bolt M8×16 （ color zinc ） 2
2 1250501-007093 GB93 φ8 (environmental color) 2
3 1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
2
4 1274100-057095 Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5 3
5 1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
3
6 1224100-010000 ZT250-S swell nail 1
7 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 1
8 1251112-001093 M6×16 Hexagon flange bolts (color zinc) 2
Fig.11 FRONT FORK
COMPONENT
Head and headlights component 1
PROCEDURE:
●
Speedometer component
Remove two bolts (1) and washers (2) with 6# hexagon socket, pick up the instrument assembly (1) slightly,
and then pull off the instrument plug.
●
Headlight components
Remove 2 bolts (3) with 4# hexagon socket and remove flanging bushing (4) and buffer rubber (5). Remove the
expansion nail (6).
Remove 2 bolts (8) with 8# sleeve, 1 bolt (7) with 4# socket, and remove flanging bushing (4) and buffer
rubber (5).
At the instrument slot of the headlamp assembly, find a suitable angle, remove the headlamp assembly from the
instrument bracket, move it forward slightly, pull out the plug and remove the headlamp assembly.
The following figure on the left shows the daytime running light connector, which is not connected by default
when leaving the factory. If necessary, move the bullet rubber sleeve down and connect it to the interface.
CAUTION:
●
Pay attention to the force when removing the cable and unplugging the plug and the cable to avoid damage.
●
The head unit should be supported during the disassembly process and protective measures should be taken
toprevent scratching the lamp cover or paint surface.