Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 65 / 94

7-FRONT FORK COMPONENT
64
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251300-045000 ZT350-R upper connection decoration nut M22×1 1 100N·m
2 1251500-050000 ZT310-R upper connection gasket 1
3 1250205-023000 GB70.1 inner hexagonal M8×35 (environmental color) 6 25N·m
4 1114300-001000 ZT350-R front left shock absorber 1
5 1114300-002000 ZT350-R front right shock absorber 1
6 1174300-013000 Reflection light
（
KM-106
）
2
7 1251100-121093 Non-standard bolt M6×25 (environmental color) 2
Fig.18 FRONT FORK
COMPONENT
Front shock absorber, upper plate component
8 1184200-139000 ZT310 main lock (electromagnetic drive / wire length
150) assembly
1
PROCEDURE:
●
Uplink board assembly
Locate the faucet lock plug and remove it; remove the nut
⑴
with 30# sleeve and remove the shims
⑵
. Remove
the upper plate bolt
⑶
with 6# inner hexagon socket.
●
Front left and right shock absorption
Remove the bolts
⑶
of the lower plate with 6# inner hexagon socket, and hold the shock absorber in the middle
with one hand. Insert a slottedscrewdriver into the slot of the upper and lower plates to slightly enlarge the slot
clearance, and disassemble the left shockabsorber
⑷
and the right shock absorber
⑸
. under. Remove the upper
plate assembly.
●
Reflector
Rotate reflector
⑹
counterclockwise to remove the reflector.
●
Faucet lock
Using 6# inner hexagon socket remove the faucet lock
⑻
.
CAUTION:
●
Use a flat-blade screwdriver to enlarge the gap between the upper and lower joint plates without
applyingexcessive force to avoid damage.
●
When removing the shock absorption, move it in the direction of axis, do not rotate or swing to prevent
scratches on thesurface.
●
The motorcycle support should be fixed during the disassembly process to prevent accidents caused byincline.
●
For the disassembly of the lower link board assembly, see the previous "steering adjustment", which will not
be repeated here.