Zontes ZT350-GK 2022, Руководство по обслуживанию

Страница: 93 / 94

14-LOWER SHROUD COMPONENT
92
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 3
2 1274100-057095 Flanged bush φ6.2×φ8.4×3.5
＋
φ14×1.5 3
3 1244100-052000 Flange bushing buffer (φ8.5×φ14×1) 3
4 1251112-001093 M6×16 Hexagon flange bolts (color zinc) 1
5 1251112-003093 M6×45 Hex flange surface 9.8 bolts (color zinc) 4 12±1.5N.m
6 1251112-005093 M6×75 Hexagonal flange bolt (color zinc) 1 12±1.5N.m
7 1274300-050000 ZT350-GK lower shroud front right bracket 1
8 1274300-009000 ZT350-GK lower shroud rear right bracket 1
Fig.1 LOWER SHROUD
COMPONENT
Lower shroud component 1
PROCEDURE:
●
Lower shroud assembly
Raise the platform of the motorcycle and remove the right hand side bolts
⑴
with 4# inner hexgon socket
，
then
take off the bush
⑵
and the pad
⑶
.
Remove the bolt
⑷
with 8#sleeve
，
then take off the bush
⑵
and the pad
⑶
.
After supporting the lower shroud assembly then remove the bolt
⑸
and
⑹
on the left hand side with 8# sleeve.
Take off the lower shround assembly,then Reassemble the bolt
⑹
to the engine after removing the bracket to
prevent oil leakage.
●
The right bracket of the lower shroud
After holding the front right bracket
⑺
then remover the bolt
⑸
with 8# sleeve,take off the bracket
⑺
then
reassembly the bolt
⑸
to the engine.
After holding the rear right bracket
⑻
then remover the bolts
⑸
with 8# sleeve,take off the bracke
⑻
then
reassembly the bolts
⑸
to the engine.
CAUTION:
●
The muffler should be completely cooled before it is disassembled.
●
The motorcycle support should be fixed during disassembly to prevent accidents caused by incline.
●
The shroud should be supported during disassembly to prevent fracture due to uneven force.
●
The bolts
⑸
and
⑹
must meet the standard torque and must be coated with a thread tightening glue.