34
front wheel rear wheel
Specification
Tires
The right tire pressure and the right tire load are important factor. Overload can lead to tire faulty
and motorcycle will be out of control.
Check the tire pressure, payload in accordance with the contents of the table below before using
the motorcycle. You should check and adjust tire air pressure before driving, during driving, rear tire
get hot and tire pressure rises.
If tire pressure is too low will cause the difficulty of turning, it will also accelerates the tire wear. If
the tire pressure is too high, the tire in ground contact area is reduced, it is easy to slip out of control.
Recommended tire pressure under the normal temperature condition: 280kPa.
Do not pay attention to the following matters may be accident caused by the failure of the tire. Tires connect
the motorcycle and ground, so it is very important. Observe the following rule:
Check the tires and tire pressure condition, adjust the tire pressure before each use.
Avoid the motorcycle overload.
Replace tires when tire wear to limit or tire surface has crack and wounds.
Always use specifications and regulations provided in the instruction manual for the size of the tires.
After installing tires, you should balance the wheels.
Read c arefully the content of the instruction.
If tire running-in is not good, it will affect the occurrence of tire slip and lose of control. When motorcycle is
using new tires, you must be driving carefully. According to the running-in-section in tires, avoid braking in the
situation of nasty accelerated, a sharp turn, and emergency within 150 kilometers after the replacement of tires.
Check tire pressure regularly and keep tire pressure within the recommended range.
When you feel the tire pressure drop, check the tire for nails, small holes, and damage to
the side of the rim (hub). Tubeless tires will gradually deflate when they have small holes.
Incorrect tire status and incorrect tire size affect the performance of the motorcycle. If there is any
breakage in the tire scratches, it can lead to faulty tires and make the vehicle out of control.
Excessive wear of tires can make tires perforation and the vehicle out of control. Tire wear is also
affect the appearance of the tire, and change the operating performance of the tire.
Check
the
state
of
tire
and
air
pressure before each use. If there are much obvious damages on
the tires, such as: damaged, scratched, or tire wear to limit position, you must replace tires.
The triangle labels the wear strip position. If the wear strip touches the ground, it shows that the tires have
been wear to pass the limit. You have to replace the tires. When you replace the tires, make sure that the size and
type of the tires is accorded with the list content below. If you replace it to different sizes or type, it will influence
the performance of the motorcycle and may even lead to the loss of control for the motorcycle.
It will cause problems if you use the tires which are out of the range of the standard. We really suggest you
use the standard tires.
Tire pressure and load
Tire status and specifications
Storage of Tires
When the motorcycle is not in use for a period of time, it is necessary to adjust the tire pressure to
the specified pressure.
The tire is rubber product of semi-hot melt formula, which is not suitable for outdoor weather in
extremely cold, otherwise it will cause frost crack of the product. Please store it in a place with higher
temperature or indoor.
120/70ZR17 (58W)
180/55ZR17
（
73W
）
Содержание VX 350
Страница 1: ......
