35
Front axle tightening torque
：
65N.m
Front axle lock bolt tightening torque
：
20N.m
Brake pliers before installation bolt tightening torque
：
45N.m
Disassembly of tires
After installing the front wheel brake, if the brake block position is not correct, it will affect the braking effect
and may cause an accident. Before driving, operating brake controller for several times, until there is certain
pressure to the brake disc when you grip it. Also, you can feel the handle grip force back to normal. Also check
the wheel to see whether the rotation is flexible.
Check the wheel
Inspection of rim
1.
Parking motorcycle and pay attention to whether the ground is smooth and firm.
2.
The damaged location of rim was detected by visual inspection.
3.Have the repair shop check the damaged rims and replace them if necessary. It is better to let
the ZONTES agent finish the work.
②
④
When you remove the front brake pliers, do not operate the brake controller. Operating the brake controller
leads to brake caliper piston ejector, difficult to return; if forced to return, it can make the brake fluid leakage.
3. Loosen the front wheel sensor screw and take out the sensor
③
.
4. Loosen the axle locking bolt
②
.
5. Put special equipment under the engine and jack up the front of the motorcycle until the front
wheel just leaves the ground.
6. Rotate the axle
④
counter clockwise and pull it out.
7. Move the front wheel forward.
8. The installation of the front wheel can be carried out in the reverse operation of the above.
9. After installing the front wheel, operate the front brake handle several times to restore the
normal grip.
1.
Use special support frame to support the motorcycle.
2.
Loosen the connected front brake caliper two bolts on the shock absorber
①
, remove the front
brake pliers.
Содержание VX 350
Страница 1: ......
