32
Brake pad
Braking system
According to the following to check the braking system:
1.Check the brake cylinder liquid level position.
2.Check for leaks the front and rear brake system.
3.Check whether the brake fluid hose leakage or rupture.
4.Check the brake disc and brake wear condition.
5.Operate the front and rear brake system to check whether is flexible and effective or not.
Check the brake fluid level position in front and rear brake fluid cylinder. If the liquid level in the
LOWER (low) below the mark, check the brake wear and brake fluid leakage.
Don't wash brake cylinder directly with high pressure water.
If swallowed into the brake fluid, it will cause harm to people, and even deadly. The brake fluid is harmful to
both skin and eye contact. Brake fluid is toxic for animals. Don't puke if swallowed into the brake fluid.
Immediately contact the poison control center or hospital. If the brake fluid gets into eyes, wash your eyes, and
look for a doctor for help. Wash your hands thoroughly. Keep children and pets away from the brake fluid.
This motorcycle front and rear wheel assembly of the disc brake. The right brake operation is very
important for safe driving. Remember to regularly check the braking system, and the inspection
qualified maintenance unit to complete.
Brake is highly significant components of personal safety; you should regularly check and adjust the brake,
and regular cleaning the sediment on the brake caliper etc, to prevent obstacles to the movement of the piston.
If the brake system needs maintenance, we strongly advise you to give this work to a qualified maintenance
unit. They have complete tools and skilled technology, and it is also the safest and most economical way to do the
job.
No regular inspection and maintenance of motorcycle brake system will increase the risk of accidents.
Confirmed before each use of motorcycle according to the brake system content. In accordance with the
requirements of the regular maintenance table to maintain the braking system.
The disc brake system is using high pressure brake. To ensure safety, the brake fluid hose and brake fluid
replacement, shall not exceed this manual inspection and maintenance the rules of the verse.
The brake fluid used in this vehicle should not be mixed with water, dust and impurities, as well as silicic acid-
based or petroleum-based fluids, otherwise it will seriously damage the braking system.Brake fluid stored in an
open container should not be used.Brake fluid left over from the last service cannot be used.Only use DOT4 brake
fluid. When brake fluid splashes on painted or plastic surfaces, it can corrode the surfaces of these substances.
Check that the front and rear wheel brake pads are worn to the extreme position. The extreme
position refers to the bottom of the friction material groove. If it is worn to the limit position,
please go to the maintenance shops and replace the front or rear brake pads in pairs.
Front braking fluid
Rear braking fluid
Rear\front wheel brake piece
Front brake fluid
low oil level line
Rear brake fluid high oil level line
Rear brake fluid low oil level line
Содержание VX 350
Страница 1: ......
