Zontes VX 350, Руководство пользователя

Страница: 31 / 50

29
Fuel pipe
Transmission chain
This transmission chain is made of special material. The drive chain has a special seal ring, the
seal ring contains grease. When you need to replace the drive chain, please hand over the
maintenance work to an authorized dealer.Keep daily check, and adjust the drive chain of the
motorcycle before driving. Accord with the following method to check maintenance.
In order to ensure safety, check and adjustment of transmission chain should be before driving.
Fuel pipe
Check the fuel pipe for damage or leakage. If there is a problem, it is necessary to replace the fuel
pipe.
When removing the fuel tank, please pull out the fuel pipe first. Do not lift the fuel tank forcibly to avoid damage
to the fuel pump outlet.
Inspection of transmission chain
When check the drive chain, please check the following questions:
①
loose chain pin
②
damage roller
③
tears or rusty link
④
bad rotation link
⑤
undue wear
⑥
improper adjustment of chain
If it is found that there is something wrong with the drive chain or improper adjustment, please contact the
authorized dealer of zontes for repair.
Transmission chain
Drive chain wear often means that the chain has also wear. Please check whether the sprocket
exist the following problems:
①
if the sprocket is excessive wear
②
Tooth is broken or damaged
③
Sprocket fixed nut is loose or not
If you find any questions about the sprocket, please contact the authorized dealer of zontes for
repair.
W hen r eplacing t he d rive c hain , you should check the wear condition of master-slave two drive sprocket; the
chain should be replaced at the same time if necessary.
Cleaning and lubrication of the transmission chain
Regular cleaning and lubricating transmission according to the following method
Chain:
1.Remove dirt and dust from the chain, be careful not to damage the sealing ring.
2.Clean the chain with seal chain cleaner or neutral detergent and water.
Good tooth profile wear tooth profile
3.Use a soft brush cleaning chain. even if use a soft brush, be careful not to damage sealing ring.
4.Wipe off water and neutral detergent, and dry the chain.
5.Sealed with motorcycle chain special chain oil, lubricating the chain .
6.After comprehensive lubricating chains, wipe away excess oil.
7.We suggest that the user to clean the chain every 1000km drive to prevent dust to break the
sealing ring.
Improper cleaning of the chain may damage the seal and destroy the chain.
Do not use volatile solvents such as paint thinner, gasoline.
Do not use a high pressure cleaner to clean chain oil.
Do not use a wire brush to clean the chain