43
Storage
methods
Restart method
1.Clean the motorcycle completely.
2.Remove dishcloth for air filter and the intake muffler exhaust.
3 . Pull o ff a ll t he e ngine o il . A
ccording t o t his i nstruction m
anual r elated c ontent, r eplace t he o il
filter a nd add new engine oil.
4.Remove the spark plug. Let the engine turned several rounds. Reinstall the spark plug.
5.Reinstall the battery referring to battery content section.
6.Make sure motorcycle lubrication is normal.
7.
Inspect the motorcycle in accordance with the content of instruction for use in the inspection
section before driving.
8.Restart the motorcycle in accord with the instruction.
Corrosion prevention
Maintain the motorcycle carefully. Corrosion prevention is very important. In doing this, your
motorcycle will look like new even after many years.
Key points to prevent corrosion
Factors that lead to corrosion:
Salt road salt, the accumulation of dirt, moisture and chemicals.
Small stones or gravel damage on the surface of the painting, or by knock against scratches.
Salt road, wind, industrial pollution and high humidity environment will lead to rust.
How to prevent corrosion
Clean the motorcycle at least once a month. Try to keep the motorcycle clean and dry at your best.
Remove
dirt
on
the
surface
of
the
motorcycle.
Salt
road
salt,
chemicals, asphalt and materials such
as SAP, bird droppings, and industrial emissions will damage your motorcycle. Remove the dirt as
soon as possible. If it is hard to clean with water, use detergent to clean. When using the cleaning
agent, you must comply with cleaner product requirements.
Clean
up
the damage as soon as possible. A careful examination of the motorcycle on the surface
of the paint damage is a must. If you find any burr or scratches, immediately repair it, avoid damage
more. If the burr and scratch is throughout the surface of parts, please let the designated company
maintenance unit to maintain it.
Put
the
motorcycle in dry and ventilated place. If you often wash the motorcycle in the garage, and
parked inside, the garage will become very wet. High humidity can increase the corrosion. If air does
not flow, even in high temperature environment, damp motorcycle will rust.
Cover
the motorcycle. Avoid the sun at noon to shine upon the motorcycle, it would lead to paint,
plastic color changed or fade. Using high quality and breathable cover can avoid the sun ultraviolet
radiation hit on the motorcycle, and reduce air pollution and dirt deposition on the motorcycle.
Distribution unit of the company can help you choose your motorcycle cover.
Storage method
If you are not using motorcycle for a while, the motorcycle needs special maintenance, this requires
some special materials, equipment and technology. For this reason, it is recommended that you
choose the company service units to complete the maintenance work. If you want to complete the
work, please click the following method:
Motorcycle
Thoroughly clean the motorcycle. Use the main parking stand to park the motorcycle on a flat ground.
The handlebars to the left, long
press
the
button
of
red power-on
button
,
the
motorcycle
will
be
electrically
cut
off
,
the
head
lock
will
be also
locked
automatically.
Fuel
With
the
method
of the siphon or other appropriate approach to pull out the fuel from the fuel tank
into the appropriate containers.
Engine
1.Remove the spark plug, put a tablespoon of oil into each of the spark plug hole, reinstall the
spark plug, and let the engine crankshaft rotate for several rounds.
2.Through dry the oil, and add new oil again.
3
.
With
cloth containing new oil to cover the new oil filter of the air inlet and exhaust muffler to avoid
Storage battery.
1.Remove the battery refer to the content in battery section.
2.Use neutral soap water to clean surface of the battery, remove rust from the terminals and wiring
connector.
3.Storage the battery indoor where the temperature is over 0
℃.
Tires
Adjust the tire pressure to the regulated pressure.
The surface of motorcycle
Put rubber protective coating on the surface of resin and rubber parts.
The antirust paint spraying on the surface of the parts that have no surface treatment.
Use the motorcycle wax coating paint the surface.
Maintenance during storage period
Please use our dedicated charger to charge the battery once a month.gel battery charger charging:
(charging voltage 14.5V ~ 14.8V). The batteries can not be charged for less than 10 hours.
Содержание VX 350
Страница 1: ......
