York YK Style H, Руководство по эксплуатации

Страница: 137 / 212

Printer screen
Figure 70: Printer screen
This screen allows definition of the necessary communications parameters for the printer. See
Printing of this manual for details of the printer connections and setup.
Table 137: Display only fields
Field/LED name Description
Time Remaining Until Next Print Displays the time until the next print log will occur, if the function is enabled.
Note:
For fields requiring access level of SERVICE. Service Technicians refer to the
OptiView
Control Center - Service Instructions (Form 160.76-M1)
for operation instructions and explanation
of all programmable setpoints and displayed values.
Table 138: Programmable
Button
V09 software
and earlier
V10 and later
with YORK
Chiller Access
Manager
Description
Automatic
Printer Logging Operator
Standard Enables or disables automatic printer logging.
Log Start Time Operator Standard Sets the time at which scheduled print logs will begin.
Output Interval Operator Standard Defines the interval at which log printing will occur.
Printer Type Service JCI Service Defines the connected printer type. Default is PC.
ACC Auto Map
Print (Enabled /
Disabled)
Service JCI Service
Only available if the chiller system uses a variable speed drive motor
controller. When a surge point is mapped, a short report of system
parameters is printed. When this function is active, all other printing
capability is disabled.
137 Model YK Style H Centrifugal Liquid Chillers with OptiView Control Center