<4. OPERATION>
4-6
IM 12E04A02-02E
Table 4.2 Cleaning Operation Setpoints
Item
Setting
range
Factory
setting
Unit
Setting mode
Mode
FUNCTION
Cleaning period
0.1 to 24.0
2.0
Hours
PROGRAM 2
1
Cleaning time 1
10 to 120
30
Sec
PROGRAM 2
4
Draining time 1
1 to 20
10
Sec
PROGRAM 2
6
Water
fi
lling time 1
10 to 120
100
Sec
PROGRAM 2
8
Relaxation time
10 to 120
150
Sec
PROGRAM 2
A
Number of cleaning repetitions
30 to 600
5
times
PROGRAM 2
3
See Section 6.7 for the setting procedures for each setpoint.
b. With Automatic Zero Calibration (Suf
fi
x code: -A3)
Automatic cleaning can be start in the following two ways.
• Startup with the internal timer.
• Startup with FUNCTION “6” in the <MAINT.> mode (see Section 6.5).
Note: Startup with the internal timer can be selected for execution (on)/stop (off) using
FUNCTION “A” in the <PROGRAM1> mode. It has been to execution (on) when
shipped from the factory.
The internal timer operation is shown in Figure 4.7.
As shown in the
fi
gure, the automatic cleaning operation is repeated at every set time of the
cleaning period (A) and automatic zero calibration is implemented once in every 3 repetitions (for
cleaning calibration ratio B = 3).
A
A
A
A
A
A
Measurement start *1
F0407.ai
B=1
2
3
1
2
3
Cleaning
Cleaning
Calibrattion
Cleaning
Cleaning
Calibrattion
*1: Measurement start is defined to be the point specified in the following:
Other mode
<MEAS.> mode
Power off
Power on (<MEAS.> mode)
Figure 4.7 Cleaning (calibration) period (Example: for cleaning calibration ratio = 3)
However, if startup of the automatic zero calibration with the internal timer is stopped, the
cleaning operation becomes the same as in Figure 4.5 because the automatic zerocalibration
operation is eliminated.
Figure 4.8 shows the automatic-cleaning operation time chart and Table 4.3 the settings.
<Valve used>
SV1: Drain valve
SV2: Cleaning-water valve
SV3: Measuring-water valve
SV4: “Zero-water” valve
3rd Edition : May. 31, 2010-00
Содержание Vigilant Plant EXA TB Series
