YOKOGAWA UTAdvanced UP55A, Руководство пользователя

Страница: 298 / 516

10-23
IM 05P02C41-01EN
Output (Control and Retransmission) Functions
10
Setting Details
Parameter
symbol
Name Display level Setting range Menu symbol
PYS
10-segment
linearizer
selection
Group 1, 2: STD
Group 3, 4: PRO
OFF: Disable
PV: PV analog input
RSP: RSP analog input
AIN2: AIN2 analog input
AIN4: AIN4 analog input
PVIN: PV input
OUT: OUT analog output
OUT2: OUT2 analog
output
RET: RET analog output
PYS1
PYS2
PYS3
PYS4
A1 to A11
10-segment
linearizer
input 1
Group 1, 2: STD
Group 3, 4: PRO
-66.7 to 105.0% of input
range (EU)
Output linearizer: -5.0 to
105.0%
B1 to B11
10-segment
linearizer
output 1
Group 1, 2: STD
Group 3, 4: PRO
10-segment linearizer bias:
-66.7 to 105.0% of input
range span (EUS)
10-segment linearizer
approximation: -66.7 to
105.0% of input range
(EU)
Output linearizer: -5.0 to
105.0%
PMD
10-segment
linearizer
mode
Group 1, 2: STD
Group 3, 4: PRO
0: 10-segment linearizer
bias
1: 10-segment linearizer
approximation
Note1: The group number (1 to 4) is displayed on Group display while each parameter is displayed.
Set it in the following orders.
(1)
PYS: Specifies where the 10-segment linearizer function is used.
Setpoint OUT functions before output to OUT terminal.
Setpoint OUT2 functions before output to OUT2 terminal. (for Heating/cooling type
only)
Setpoint RET functions before output to RET terminal.
(2) PMD:
Specifies whether to use it as a 10-segment linearizer bias or a 10-segment
linearizer approximation.
(3) A1 to A11, B1 to B11: Sets the 10-segment linearizer input and 10-segment linearizer
output.
Note
• Set the 10-segment linearizer so that it increases monotonically.
• If the same setpoint is set for the two or more parameters of 10-segment linearizer selection
(PYS), a smaller group number is used.
10.13 Setting 10-segment Linearizer for Output