YOKOGAWA UTAdvanced UP55A, Руководство пользователя

Страница: 254 / 516

9-33
IM 05P02C41-01EN
Program Pattern Functions
9
9.8.2 Hold-on switching (JC=HOLD)
Description
When segment hold (JC=HOLD) is selected as the segment end condition, the program
pauses (is placed on hold) at the end of the current segment. While the program is on
hold, the HOLD lamp is lit. The program is kept on hold until the hold state is released
either by key input or external contact input. When the hold state is released for the last
segment in the program, the program stops (resets). Executing the advance function
while the program is on hold releases the hold state.
An example of segment hold being used as the segment end condition is as
follows:
During HOLD operation
Hold operation
n = 1 to 98
Program operation
Segment n Segment n+1
Prgram operation
Setpoint
Time
Target setpoint of Segment n
Example of the last segment
Last segment
JC = HOLD
Starting target setpoint (SSP)
The program advances or
HOLD mode is cancelled.
During HOLD operation
Hold operation
Program operation Program operation stops
Setpoint
Time
9.8 Setting the Operation in Segment Switching