manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 86 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 86

5-3

IM CW240E

Setting Ranges Using the Direct Keys

5

5.1  Setting the Voltage Range

NOTE

If the result of "power rating 

⫻

 VT ratio 

⫻

 CT ratio 

⫻

 1.3" exceeds 999.9 TW, the

voltage range cannot be changed. To change the voltage range in this case,

modify other settings (wiring, current range, clamp-on probe type, VT ratio, and/

or CT ratio) and then change it.

TIP

• A voltage range cannot be set during integration measurement (including when on

standby).

• A voltage range cannot be set in the VOLT. QUALITY or WIRING DIAG. screen.

• If integral measured data has not been cleared, the voltage range cannot be set.

To change the voltage range in this case, press the F5 key (HOLD/CLEAR) for more
than 3 seconds on the MEASURE screen to clear integral measured data and then
change it.

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов