manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 120 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 120

6-21

IM CW240E

Configuring Settings

6

6.3

General Settings 2/2

The General 2/2 screen allows you to set up the following items:

Setting Item

Description

For the setting up of zero cross filter, see Section 6.8.5, Setting Up ON/OFF of a Zero Cross Filter.

VAR METHOD

SAMPLING METHOD

FREQUENCY SOURCE

AVERAGE TIMES

Wh DISPLAY

INTERVAL Wh DISP.

THD MEASURE METHOD

PA CALC. METHOD

HARM. GRAPH ORDER

Sets whether to use a reactive power meter method. 

Sets PLL synchronization or fixed clock (50/60 Hz). 

Sets a voltage input level regarded as the reference for frequency 
measurement.

Performs moving averaging of measured data.
(Sets the number of averaging times.) 

ZERO CROSS FILTER

Sets whether to insert a zero cross filter into the frequency circuit.

Sets the number of digits that can be displayed and the unit of 
measurement of electric energy in integration measurements.

Sets the number of digits that can be displayed and the unit of 
measurement of interval electric energy in demand measurements.

Sets the calculation method of total harmonics distortion (THD). 

Sets the reference for harmonic phase angle. 

Sets the order (all orders/odd-number orders) of harmonics to be 
displayed on a graph. 

NOTE

• Setting items cannot be changed during integration measurements (including

when on standby).

• Unless integral measured data has been cleared, setting items cannot be

changed (with the exception of HARM. GRAPH ORDER). To change a setting
item, press the F5 key (HOLD/Clear) for more than 3 seconds on the Measure
screen to clear integral measured data and then change the setting.

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов