manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 43 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 43

3-11

IM CW240E

Preparation for Safe Measurements

3

3.2  Connecting a Power Supply

<5> Lock 

Lock switch 

NiMH battery pack 

<3> Remove 

<4> 

Insert 

<3> If using alkaline batteries, raise the lock switch at the back of the CW240 to

remove them from the battery holder. Then install the NiMH battery pack
into the holder.

<4> Place the battery holder into the holder inlet of the CW240. Slide the battery

holder into the slot, so that the battery holder connector connects properly
with the battery connector.

<5> Lower the lock switch on the side of the CW240 to fix the holder.

(The indication changes to "

䉭

FREE".)

●

Recharging the NiMH Battery Pack

When shipped from the factory, the dedicated NiMH battery pack (optional) is
not fully charged for safety reasons.
Recharge the battery pack to its full level before use.
When recharging it, use the CW240 and AC adapter.

WARNING

• When recharging the NiMH battery pack, always do so using the CW240 main

unit.

• When recharging the NiMH battery pack, keep the ambient temperature within

the range from 10°C to 35°C. Recharging the battery pack outside this range
may result in an insufficient amount of charge, solution leakage, or battery
heating.

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов