YOKOGAWA CW240 Скачать руководство пользователя страница 42

Страница: 42 / 388

3-10

IM CW240E

3.2 Connecting a Power Supply

WARNING

• Do not use a defective battery pack, such as any leaking solution, deformed,

discolored, or showing any other abnormality.

• Avoid any metal coming into contact with the battery pack when carrying it, as

there is a danger of a short.

• Do not immerse the battery pack in water or make it wet. Otherwise, it may

heat up or rust as well as leading to a loss of functions.

• If the battery pack is not used for a prolonged period, remove it from the CW240

and store it in the following environment.

Storage period of 1 year or less:

Temperature of -20°C to 35°C (in locations with low humidity)

Storage period of 3 months or less:

Temperature of -20°C to 45°C (in locations with low humidity)

●

Procedure for Installing the NiMH Battery Pack

Follow the steps below to install the dedicated NiMH battery pack.

<1> Check that the power switch is turned OFF.
<2> If the AC adapter is in use, disconnect the power cord of the AC adapter

from the outlet.

CW240 main unit

<1> Check that the power switch

is turned OFF.

<2> Check that the power plug

is disconnected.

AC adapter

Содержание CW240





































































































































































































































































































































































































Результаты поиска

Содержание CW240

Отзывы:

YOKOGAWA CW240, Руководство пользователя, Страница: 42 / 388

Результаты поиска

Содержание CW240

Отзывы: