manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 40 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 40

3-8

IM CW240E

3.2  Connecting a Power Supply

●

Procedure for Replacing Alkaline Batteries

Follow the steps below to replace alkaline batteries.
<1> Check that the power switch is OFF and no AC adapter has been

connected.

<2> Raise the battery holder lock switch at the back of the CW240 to remove

the alkaline battery holder.

<3> Remove the old batteries from the battery holder and insert six new alkaline

batteries.

<4> Place the battery holder into the holder inlet of the CW240. Then slide the

battery holder into the slot, so that the battery holder connector connects
properly with the battery connector.

<5> Lower the lock switch on the side of the CW240 to fix the holder.

(The indication changes to "

䉭

FREE".)

CAUTION

Place alkaline batteries into the holder with the positive (+) and negative (–)

polarities of the batteries agreeing with the polarity indications in the holder.

Lock switch 

<1> Check that the 

power switch is turned OFF.

CW240 main unit

CW240 main unit

<2> Remove 

<3> Inser

t

<4> 
   Insert

<5> Lock 

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов