manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 45 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 45

3-13

IM CW240E

Preparation for Safe Measurements

3

●

Backup Hours with a NiMH Battery Pack

The number of backup hours available using a NiMH battery pack vary with the
operating environment and conditions. Refer to the table below.

Operating Conditions

Backup Hours Available

LCD backlight OFF

Approx. 3 hours

No access to a PC card

●

NiMH Battery Life

The NiMH battery pack can be recharged approximately 300 times, though the
frequency depends on the operating environment. The life of the battery pack is
over if the low-battery mark appears soon after the battery pack has been fully
recharged. Replace the battery pack with a new one.

3.2  Connecting a Power Supply

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов