manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 326 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 326

14-2

IM CW240E

The CW240 includes a function for saving measurement data, setting values,
etc., if the power supply provided to the CW240 is interrupted during integration
measurement. The measurement data, setting values, etc., up to the point of
interruption are saved.
The CW240 switches automatically to battery operation if an alkaline dry cell or
a NiMH (nickel metal hydride) battery is installed.

●

 Saved Data

Set items are saved in the data save as indicated below.

• When the interval time is the standard interval (1 second to 60 minutes)

Mean value, minimum value, maximum value, electric energy, voltage
fluctuation: The values immediately previous to the power failure.
Demand value: The demand value one previous from the time of power
failure.

• When the interval time is a short interval (1 waveform to 500mS)

Mean value, minimum value, maximum value, electric energy, voltage
fluctuation: The values 10 seconds previous to the power failure.
Demand value: The demand value one previous from the time of power
failure.

●

 Operation after Power Recovery

Operation is as follows, according to the measurement status at the time of the
power failure and the time of recovery.

Integration Measurement
Power failure during 
standby

Recovery before integration
measurement starts

Recovery after integration 
measurement start time has
passed

Saves the date and time of the power failure along with the 
measurement data from before the power failure, if the CW240 has 
been set to save to the PC card or the internal memory.

Integration Measurement
Power failure during 
integration

Displays the message screen, and 
returns to standby. Starts integration
measurement when the set time has 
been reached.

Displays the message screen, and 
starts integration measurement 
immediately after power failure recovery.

●

 Message Display

The following message screen is displayed.

Measurement (internal operation) is continued even during message display.
Press any key to clear the message display.

Chapter 14  Power Failure Processing Function

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов