YOKOGAWA CW240 Скачать руководство пользователя страница 254

Страница: 254 / 388

8-9

IM CW240E

Saving Measured Data

NOTE

• Manual save is not available during integration measurement (including being

on standby).

• A file name will be automatically assigned if it has not been specified:

Measured data file: 240MCXXX.CSV (XXX: 000 to 029), text data

Waveform data file: 240MWXXX.WFM (XXX: 000 to 029), binary data

• In manual save, the save settings of AVE., MAX., and MIN. items on the Save 2/

2 page will be ignored (that is, the average, maximum, and minimum values
are not saved).

TIP

• When DATA SAVE is set to a PC CARD, the

mark appears in the relevant area on

the screen. Mark

flashes during an access to the PC card.

• If DATA SAVE is set to MEMORY, the

mark appears in the relevant area on the

screen. Mark

flashes during an access to the internal memory.

8.2 Saving Measured Data

Содержание CW240





































































































































































































































































































































































































Результаты поиска

Содержание CW240

Отзывы:

YOKOGAWA CW240, Руководство пользователя, Страница: 254 / 388

Результаты поиска

Содержание CW240

Отзывы: