manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 334 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 334

16-2

IM CW240E

16.1  Things to Check When There

 is a Malfunction

This section describes how to handle problems that may arise with the CW240.
If the CW240 does not operate correctly even after checking the items listed
below, or if there is a problem not covered here, please contact a service
representative listed on the back cover.

If an error message has been displayed on the display screen, refer to Section
16.2, Error Message Content and Actions.

Symptom

Things to Check

Reference Section

1)
Nothing is displayed
when the power 
switch is turned ON.

2)
Setting data is 
initialized when 
power is turned
 OFF

3.2.1

3.2.1

When using AC power
• Confirm that the power cord is connected to the                 

outlet correctly.

• Confirm that the power supply is within the

allowable power supply voltage range.

3.2.2
3.2.3

When using battery power
• Confirm that the battery case is correctly installed.

3.2.3

• If a NiMH battery pack is being used, confirm that

the battery has been sufficiently charged.

3.2.2

• If an alkaline dry cell is being used, confirm that

the battery has not dissipated. (Confirm that the
battery is installed with correct polarity.)

3.6

—

• If the opening messages "RTC Initialized" and

"Settings Initialized" are displayed when power is
turned ON, the backup battery has become
dissipated. Backup batteries cannot be replaced
by the customer.
Contact a service representative.
The lifetime of the backup battery is
approximately 10 years.

3)
The measurement
display value is 
incorrect.

• Check for the possibility of noise on the input

signal.

3.3

3.4

• Confirm that the measurement probe and clamp

are connected correctly.

6.3.2
6.3.3

• Confirm that the frequency measurement element

has been set correctly.

4.2

• Confirm that the ambient temperature/humidity

are within the specification's allowable range.

Chapter 16  Maintenance Troubleshooting

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов