YOKOGAWA CW240 Скачать руководство пользователя страница 36

Страница: 36 / 388

3-4

IM CW240E

3.2

Connecting a Power Supply

To connect the instrument to a power supply, use the AC adapter(accessorie).

As backup power supply against a power failure, one of the following batteries
can be used. Use them together with the AC adapter.

• Alkaline batteries (accessorie)

See 3.2.2, Using Alkaline Batteries.

• NiMH battery pack (optional)

See 3.2.3, Using a NiMH (Nickel-Hydrogen) Battery Pack.

3.2.1

Connecting the AC Adapter

●

Before Connecting a Power Supply

There is a danger of electrical shock or damage to the instrument. Observe the
following cautionary notes when handling the AC adapter.

WARNING

• Use only the Yokogawa-supplied dedicated power cord.

• Check that the power source voltage matches the supply voltage rating of the

AC adapter, and then connect the power cord to the outlet.

• Check that the power switch of the CW240 is turned OFF and then connect the

power cord.

• If the CW240 is not used for a prolonged period, disconnect the AC adapter

power cord from the outlet.

• Do not use any AC adapter other than the one (part number: 788011) dedicated

to the CW240.

• Do not place any objects on the AC adapter or power cord, and do not let the

power cord come into contact with a heating element.

• Always hold the plug of the power cord rather than holding and pulling the

cord itself when disconnecting it from the outlet.

Содержание CW240





































































































































































































































































































































































































Результаты поиска

Содержание CW240

Отзывы:

YOKOGAWA CW240, Руководство пользователя, Страница: 36 / 388

Результаты поиска

Содержание CW240

Отзывы: