manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 161 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 161

6-62

IM CW240E

6.5

Save Data Settings 2/2

The Save 2/2 screen allows you to set up the following items.

Setting Item

Description

Allows you to set whether or not to save data. 

ENERGY data

DEM. data

WAVEFORM DATA

Allows you to set whether or not to save data.

NOR. MEAS. data

HARM. MEAS.

HARM. MEAS.

DETA. 

Common to normal 

measurement and 

harmonic measurement 

Allows you to set whether or not to save data.

Allows you to set whether or not to save data. 

Allows you to set details such as the number of loads, 
measured value, and  harmonic order. 

INST.

AVE.

Allows you to set whether or not to save data. 

MAX.

MIN.

SAVE TIME
Indicates the length of time of data that can be saved in the data storage
destination based on the remaining capacity of the memory (PC card or internal
memory) set to DATA SAVE and the noted data save items.

NOTE

• Setting items cannot be changed during integration measurements (including

when on standby).

• Unless integral measured data has been cleared, setting items cannot be

changed. To change a setting item, press the F5 key (HOLD/Clear) for more
than 3 seconds on the Measure screen to clear integral measured data and
then change the setting.

TIP

If the RS232 connection destination is set to PRINTER, the same items as the save
items are printed out.

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов