manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 12 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 12

6

IM CW240E

Precautions for Safe Use of the
Instrument

When operating the instrument, be sure to observe the cautionary notes given below
to ensure correct and safe use of the instrument. If you use the instrument in any way
other than as instructed in this manual, the instrument’s protective measures may be
impaired. Yokogawa M&C Corporation is by no means liable for any damage
resulting from use of the instrument in contradiction to these cautionary notes.
The following safety symbols are used on the instrument and in this manual.

Danger! Handle with Care.

This symbol indicates that the operator must refer to an explanation in the
User's Manual in order to avoid risk of injury or death of personnel or damage
to the instrument.

➤

Hazardous Voltage

The operator must never attempt to touch equipment or parts marked with this
symbol.

Direct Current

This symbol indicates DC voltage/current.

Alternating Current

This symbol indicates AC voltage/current.

ON

This symbol indicates On (power).

OFF

This symbol indicates Off (power).

Double insulation

This symbol indicates double insulation.

WARNING

Indicates a hazard that may result in the loss of life or serious injury of the user

unless the described instruction is abided by.

CAUTION

Indicates a hazard that may result in an injury to the user and/or physical

damage to the product or other equipment unless the described instruction is

abided by.

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов