YOKOGAWA CW240 Скачать руководство пользователя страница 255

Страница: 255 / 388

8-10

IM CW240E

8.2.3

Automatic Save

In automatic save, the CW240 automatically saves measured data from the
start to the end of integration (during integration measurement).

[

Setting up the save conditions

Setup necessary items such as setting of the start and stop times of
integration, interval time for saving data, etc. on the Save screen.

Save 1/2, Save 2/2, and Harm. Meas. Detail screens

SEE ALSO

For more information on setting, see Section 6.4, Save Data Settings 1/2, and Section
6.5, Save Data Settings 2/2.

[

Displaying the Measure screen

This subsection describes the saving procedure taking the Integrate
screen as an example.

(Saving of measured data does not mean the saving of data displayed on
the screen, but that items set up on the Save screen will be saved.)

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Saving data

START

&STOP

Press the START&STOP key.

Integration starts according to the setting of the integration start method.

(There are cases where integration is on standby until integration starts.)

Measured data will be saved at every interval time (until integration ends).

8.2 Saving Measured Data

Содержание CW240





































































































































































































































































































































































































Результаты поиска

Содержание CW240

Отзывы:

YOKOGAWA CW240, Руководство пользователя, Страница: 255 / 388

Результаты поиска

Содержание CW240

Отзывы: