manualshive.com logo in svg

YOKOGAWA CW240, Руководство пользователя, Страница: 208 / 388

Поделиться
Скачать
YOKOGAWA CW240 Скачать руководство пользователя страница 208

7-12

IM CW240E

NOTE

• If wiring is three-phase three-wire two-current, U3 and I2 are values obtained

by vector calculation.

• If wiring is three-phase three-wire three-current, U1, U2, and U3 are phase

voltages obtained from the virtual neutral-point.

• If wiring is three-phase four-wire or three-phase four-wire four-current, a volt-

age value becomes phase voltage.

• If the reactive power meter method is not used, reactive power, power factor,

and phase angle are calculated by multiplying the polarity of reactive power
obtained by the reactive power meter method.

• If wiring is three-phase three-wire two-current, or three-phase three-wire of a

Scott connection, P1, P3, Q1, Q3, S1, S3, PF1, PF3, PA1, and PA3 do not have
a physical meaning.

• If wiring is three-phase three-wire three-current, active power and reactive

power are results of calculations using phase voltage from the virtual neutral-
point.

7.2  Measure Screens

Содержание CW240





































































































































































































































































































































































































Отзывы:

Нет отзывов