The assignment of IP address data takes place via the MAC address. The IP address of
your Ethernet PG/OP channel for the interfaces X1 and X2 can be found on the front of
your CPU with the name "MAC PG/OP: ...".
X1 PG/OP
X2 PG/OP
MAC PG/OP: 00-20-D5-77-05-10
The assignment of the IP address data happens online in the
SPEED7 Studio
with the
following proceeding:
1.
Start the
SPEED7 Studio
with your project.
2.
Click in the
Project tree
at
‘Devices and networking’
.
ð
You will get a graphical object view of your CPU.
3.
Click at the network
‘PG_OP_Ethernet’
.
4.
Select
‘Context menu
è
Determine accessible partner’
.
ð
A dialog window opens.
5.
Select the according network interface card, which is connected to the Ethernet
PG/OP channel and click at
‘Search’
to determine the via MAC address reachable
device.
ð
The network search is started and the found stations are listed in a table.
"Initialization"
VIPA System SLIO
Configuration with VIPA SPEED7 Studio
SPEED7 Studio - Hardware configuration - Ethernet PG/OP channel
HB300 | CPU | 013-CCF0R00 | en | 19-30
275