manualshive.com logo in svg

YASKAWA VIPA System SLIO, Руководство пользователя

Поделиться
Скачать
YASKAWA VIPA System SLIO Скачать руководство пользователя страница 34

3.

For demounting and exchange of a (head) module or a group of

modules, due to mounting reasons you always have to remove the

electronic module right beside. After mounting it may be plugged

again.

Press the unlocking lever at the lower side of the just mounted right module and pull

it forward.

4.

Turn the locking lever of the module to be exchanged upwards.

5.

Pull the module.

6.

For mounting turn the locking lever of the module to be mounted upwards.

7.

To mount the module put it to the gap between the both modules and push it,

guided by the stripes at both sides, to the mounting rail.

8.

Turn the locking lever downward, again.

9.

Plug again the electronic module, which you have removed before.

10.

Wire your module.

ð

Now you can bring your system back into operation.

VIPA System SLIO

Basics and mounting

Demounting > Demounting periphery modules

HB300 | CPU | 013-CCF0R00 | en | 19-30

 

34

Содержание VIPA System SLIO





























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды